Description
Fast charge 2 of your mobile devices at the same time. Charge a combination of your phone, GPS, camera & tablet from your BMW motorcycle with a standard BIKE power socket.
• Connects to Ø12mm DIN / BIKE 12V socket found on BMW motorcycles.
• Charges 2 x USB devices with up to 3300mA current available to share. – Charge current adapts to each connected device for safe recharging.
• Creates weatherproof seal against inserted USB cable, or ‘ride proof’ cap protects USB port not in use – Worry free phone, camera or GPS charging in any weather!
• Built in protection turns off USB charging & prevents your parked vehicle’s LFP (LiFePO4) or AGM (Pb)battery from draining – Starts back up when vehicle engine fires up.
• Monitors and displays parked vehicle’s battery status – Indicates battery is ‘start ready’ at the blink of an LED!
OPERATION: fully automatic
• Vehicle battery protection: AUTO off 1 hours after engine stopped or if battery voltage drops below 12.4V
• Turns on if vehicle battery voltage increases above 13.3V.
• Short circuit, overheat, over-voltage protection.
OPERATION (Voltage)
• USB ON – 13.3V to 18V – unlimited USB output, USB LED on. Delivers USB power when vehicle engine is charging battery.
• USB 1 HOUR – 12.4V to 13.3V – 1-hour USB output, USB LED on. Go to standby mode after 1 hour or voltage < 12.4V.
• STANDBY MODE – Monitoring voltage, turns back on if vehicle battery voltage increases above 13.3V.
• OFF = 9V
• CHARGE CONNECTOR (INPUT): 90° BIKE (DIN Ø12mm)
• POWER (INPUT): Vehicle 12V system with 12V lead-acid or 12.8V lithium battery.
• CHARGE CONNECTOR (OUTPUT): 2x USB (located directly on the charger)
• POWER (OUTPUT): 3300mA @5V
• STYLE: Fully enclosed electronic circuitry with blue LED, unique seal and cap design for USB sockets; use any USB cable, seals when inserted.
**See extra images for fitment position
