Fat Boy Lithium and Lead Acid Charger Suitable for AGM, GEL, and Standard Flooded Types.
12V 2.0A 9 Step Algorithm Auto Detecting
Auto Switching 120-240VAC-50/60Hz
Input Cable 6Ft 18AWG, US SPT-2, EU-H03VV
Max Voltage 14.9V (Pb) 14.6V (LiFePO4)
Suitable for Lithium and Lead Acid Types
Dedicated Lithium 9 Step Algorithm
Suggested for 3 to 100AH batteries (Pb)
Suggested for 2-20AH (LiFePO4)
Spark Proof (Lead Acid Only)
Short Circuit Protection (Lead Acid Only)
Reverse Polarity Protection (Lead Acid Only)
Battery Recover Mode (Not Lithium)
Premium Retail Packaging
Includes: 21″Clip and Eyelet Maintenance leads
Optional: PDCFB25 with 1×25″ extension lead.
Fat Boy 12V 2.0A Lithium and Lead Acid Charger
Includes BMW Canbus Connector
Sleek New Design with Easy to read Charge Level Indicators
Suitable for LiFePO4, AGM, GEL, and Standard Flooded Types. “Smart” microprocessor selects correct chemistry when battery is connected. Plug and Play, no thinking, PDCFB does it for you! Latest technology optimized for Motobatt Batteries.
Qualification Stage checks the battery is over 2V for safety reasons, then transitions to “Rescue” Phase where an arsenal of 5 different recovery modes can be utilised to revive heavily Sulphated or deeply discharged batteries. Generally at this stage unusually high voltage is seen early in the charge cycle, once the rescue phase is done the battery is ready for
Soft Start Phase When the charger detects a low initial state of charge, voltage and current are delivered at a specific rate to assist the battery recovery before entering Pulse charging mode.
Pulse Phase provides a high frequency pulse charge to help the newly recovering battery to accept charge as it enters recondition mode.
Recondition Phase continues to work the battery at a slightly higher voltage and amperage to re-activate the battery plates for improved depth of charge. Now that the battery has been eased back to life…….
Bulk charge phase can begin giving constant current to the battery up to about 80% of its capacity.
Absorption Phase begins with constant voltage being supplied while current is reduced. This occurs according to the batteries ability to accept charge up to 100%.
Check Phase is now activated to monitor the batteries ability to hold the charge properly, if not it will cycle back through the entire process for 24 hours or more until it determines the battery cannot be recovered. For revived batteries it then enters
Maintenance Phase where the battery can stay indefinitely connected to the charger. As the battery drops voltage while unused, the unit will activate when needed to ensure a full state of readiness.
Keeping your batteries properly maintained with dramatically Extend working Life.