- 12/6 volt 1.00 Amp 7 stage battery charger & monitor.
- Automatic voltage detection and automatic shut off
- Maintains batteries up to 100Ah
- Charges batteries from 4Ah up to 20Ah
- Reverse polarity protection and spark proof
- LED status indication
- Save money and get longer life from your battery.
- Keep your motorcycle battery healthy during storage over the winter months or just between rides.
- Maintains a safe voltage during float cycle well below the gassing voltage of a lead acid battery to keep it topped up. Microprocessor controlled, safe for all battery technologies ( AGM, GEL, FLOODED LEAD ACID, CYCLIC & STANDBY ) Comes with temporary & permanent battery connection leads.
BMW owners require an additional male plug adapter- see part No. 6194910RK. If you wish to use your existing power outlet/inlet** Please read additional notes below.
**NOTE – MODELS WITH CANBUS. – Instead we advise bypass the BMW power outlet & use the one of the leads with its own plug (supplied with the charger) and connect direct to the battery. This way you still have quick & easy charging convenience. (CANBUS system will not allow many aftermarket chargers to charge via the factory outlet to the battery).
Q; Can I override the CANBUS system to allow this charger to charge via the factory outlet?
A; Yes. The BMW power outlet can be used with our aftermarket charger but you need to follow the correct sequence as follows
1) Ideally have the charger already switched \”on\” at 240v at the wall.
2) Have the bike ignition key in the \”on\” position at the same time when connecting the charger to your bike via the BMW power outlet.
3) After sequence 1 & 2 you may turn the bike ign key \”off\” / \”lock\” and remove key from the bike as normal.
Q; Which BMW models have CANBUS?
A; All R1200 Boxer Twins, newer style transverse inline 4cyl models & F800/650 twins.
AC Input Rating: 100-240VAC 50/60Hz
DC Output Rating: 6VDC / 12VDC @ 1.0A
Low Voltage Threshold 4V(6V)/7.5V(12V)
Output Termination: Constar for easy connection with either of included cables – BFL1 alligator clips or BFL2 ring terminals
Operating Temperature: -10oC to +45oC
Please Note: For indoor use only.
**2 Year Warranty