Menu

BRAKE PAD (Rear) WEAR LEAD

SKU: 34FA438LEAD

$ 40.00

Description

  • K1200GT (K44 Models)

**HOW TO FIT WEAR LEAD TO BRAKE PAD

Please ensure sensor end is fitted into the slot in the pad backplate the correct way round. 
i.e. Bulbous side on the friction material side of the pad which will make contact with the brake disc
when the friction material on the pad has worn down to its service limit (Flat side of the sensor goes 
to caliper piston side of brake pad)
The warning lead plug is a tight fit into the brake pad back plate so cannot always be removed without damage.
The electrical end of the plug is made so it plugs straight into the BMW OEM wiring loom on the bike without any modifications.
Always refer to the BMW workshop manual for exact fitting of this brake part.
**Please note : The bike will need to have the warning light extinguished using diagnostic equipment 
(Replacing the lead will not turn off the light on the dash!) 
 **Brake pad wear indicator is for Brake pad Part number for 34FA438K  
Back to top