Menu

ELRING DIRKO HT SILICONE BASED SEALER 70ml (Black)

SKU: 100031B

$ 28.00

Description

TOP QUALITY GASKET MAKER/SEALER.

Description and applications

Dirko™ HT Black (acetic curing) is a high-quality, high temperature resistant single component silicone-based sealing compound that exhibits permanently resilient properties.
It provides excellent adhesion on all standard metals, cast iron, plastics (except for PE, PP and PTFE) and glass.

Due to a reaction with humidity in the air Dirko™ HT Black cures to form silicone.

The product can be used for a very wide range of applications.

General product information

  • Chemical basis Acetoxy silicone
  • Curing Room temperature vulcanised (RTV)
  • Components Single component
  • Colour Black
  • Consistency Pasty, stable, permanently resilient when cured
  • Temperature range -60°C to +300°C (for 24h up to +315°C)
  • Maximum sealing gap 2,0 mm
  • pH value Neutral
  • Electrical conductivity Insulating
  • Resistant to Mineral oils (including additives), synthetic oils,
  • Lubricating grease, Coolants, UV radiation , cold and hot water, salt water , cleaning agents, weak acids and alkalis
  • Possible applications valve cover, oil pan , water pump , oil pump , diff, finial drive housing , gearbox, gear oil sump , thermostat housing , control housing , axle cover,  headlights, rear light , battery compartment

Technical data

  • 2.1 General properties
  • Measured variable Value Test standard
  • Shore A hardness 30 ± 5 DIN 53505
  • Density 1,1 ± 0,2 g/ml DIN 53479
  • Skin formation time (23°C, 50% relative humidity) 5 – 10 min DIN EN ISO 291
  • Curing time (23°C, 50% relative humidity) ca. 4,5 mm / 24 h DIN EN ISO 291
  • Elastic modulus 100% 0,6 ± 0,2 N/mm² DIN EN ISO 8339
  • Elongation at break 600 ± 100 % DIN 53504
  • Tensile strength 2,9 ± 0,2 N/mm² DIN 53504

General information

Usage and processing instructions:

1. Remove sealant residues and clean the sealing surfaces with solvent.

2. Sealing surfaces must be clean, dry, and free of oil or grease before applying the sealing compound in order to ensure reliable sealing and adhesion.

3. Processing temperature (ambient / adhesion surface temperature): +5 to +35°C

4. Apply the sealing compound evenly across the entire surface.

5. Immediately remove any excess sealing compound applied, as there is a risk that it could drip into the interior.

6. Depending on the application, the parts can be fitted immediately after application, after skin formation or after complete curing.

7. Fit the components in line with the manufacturer’s specifications.

8. The sealing function is immediate.

9. After use, reseal the sealing compound securely.

10. Safety and technical data sheet at www.elring.com

11. In case of further questions, please contact our service hotline.

Storage

  • Optimum storage conditions: Cool (+5°C to +25°C) and dry location
  • Minimum shelf life: 24 months in unopened containers.
  • Seal opened containers securely and use up as soon as possible.
  • The batch number has the following structure: YYWWCCCCC (filling date)
Back to top