Menu

FUEL HOSE (Rubber) 50cm

SKU: 1695403R

$ 11.00

Description

  • R2V 1985 > 1996 (Can be retro fitted to pre 1985 R2V models)

Quality Aftermarket 13 x 6mm hose.

Use hose spring clips part # 1695405R or 1695404RS

GIVES THAT ORIGINAL LOOK, PERFECT FIT WITH AN EXCELLENT SEAL AROUND FUEL TAPS & FITTINGS.

Amounts normally used per bike (With standard Bing Carbs – Not R90S)

**R2V 1970 > 1985 With 2 x Straight outlet taps inc crossover pipe = 800mm approx

**R2V 1978 >  With 1 x Straight outlet tap inc crossover = 700 mm approx

**R2V 1985 >  With 2 x 90° outlet taps inc crossover = 900 mm approx

**R2V 1985>   With 1 x 90° outlet tap inc crossover =  600 mm approx

SOLD PER 1/2 meter  LENGTH eg; QUANTITY x 1 = 1/2 Metre (50cm)

Low-permeation, premium hose for use on carburetted engines, PCV and EEC systems, and for fuel return hose on fuel injection systems. Not for use on the pressure-side of fuel injection systems. Approved for use with leaded and unleaded gasoline, diesel, bio-diesel, E-85, Methanol, Ethanol, and gasohol fuels. 

Meets SAE J30R14T1, EPA 40 CFR 1051.110 , and CARB small engine off-road requirements for low permeation
• Textile spiral layer (2 spiral)
• Thermoplastic barrier layer
• Oil, heat, ozone and abrasion resistant cover
• Recommended for carburetted engines in cars, light trucks, off-road vehicles and small engines

NOTE: Warning Do not submerse in fuel.

Temperature: -40° F to 257° F (-40° C to 125° C)

Back to top