Description
- R100GS 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
- R100GSPD 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996
- R80GS 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996
- R80GSPD 1990, 1991, 1992, 1993, 1994, 1995, 1996
- R100R 1992, 1993, 1994
- R80R 1992, 1993, 1994
- R100R Mystik 1994, 1995
- K1 1990, 1991, 1992
- K100RS 4V 1991, 1992
- K1100LT 1992, 1993, 1994, 1995, 1996, 1997
- K1100RS 1993, 1994, 1995, 1996
**This is the complete fix for the troublesome BMW paralever needle bearing system.
**Kit comes with new upgraded greaseable pivot pins with removable grease nipples.
**Pivot pins are made of hard, Chromed Steel . High stress structural parts, it also has good corrosion resistance.(Pins are now silver in colour!)
**The bushes are straight cut and deeper than the original tapered BMW needle bearing type and can be greased on a regular basis.
**Tested in Australia over the past 36 months, on some of the roughest roads /corrugations without problems.
**Easy to fit.
**Please note: When fitting this kit to R80/100GS 87 > 88 you may have to enlarge the inner diameter of the swinging arm where the new bush fits through as these early paralever models had slightly smaller inner diameter casting.
Contact us if you require further clarification.
