CALIPER BLEED NIPPLE REAR (STAINLESS STEEL)
$ 13.50
Description
- R850 /1100 (NOT R1100RS)
- R850 /1150R /Roc /RS /RT /GS /GSA
- R1200C /Ind /Mon
- M6 Thread
**Bleed Nipple holder part # 3414018RH
Related Products
You might also like
Product categories
- R Series 1970 > 1996 *
- K Series 1983 > 2004 *
- K Series 2005 > *
- R4V Series 1993 > 2004 *
- R850GS R1100GS
- R850R R1100R
- R1100RS R1100RT
- R1100S
- R1150GS R1150GSA
- R850 R1200 (Cruisers)
- R850R R1150R Rockster
- R1150RS R1150RT
- Accessories & Equipment
- General Service Parts
- Engine
- Engine Electrics
- Mixture Preparation & Control
- Manuals & Books
- Fuel Tank
- Exhaust
- Clutch
- Gearbox
- Driveshaft
- Front Forks
- Steering
- Final Drive
- Brakes
- Pedals
- Wheels & Tyres
- Suspension
- Frame
- Screen
- Seat
- General Electric
- Lights
- Instruments
- Cables
- Metzeler Tyres
- Hepco & Becker Luggage
- R4V Series 2005 > *
- R4V LC Series 2013 > *
- F & G Single Cylinder 1993 > *
- F Twin Cylinders 2006 > *
- S Series *
- C Scooters *
- Pre 1970 Models *
- 2nd Hand & Clearance Parts *
- Handlebars (Lucas Germany) *
- Extenda Fenda *
- Rugged Roads GS Equipment *
- General Parts Sections *
Testimonials
Pass my thanks on to Bruce for his excellent diagnostics
Please pass my thanks on to Bruce for his excellent diagnostics. On his advice I checked both butterflys with a torch and both were bleeding light. I adjusted them to seat properly and was then able to balance the carbs perfectly and get it to idle nice and slow. It runs beautifully now, very smooth and responsive. Thanks again for your help and excellent service as always.
You all rock over there!
Many thanks Brian and everyone for all your help. I finally got the bearing carrier out and it was the pin as you thought Brian, somehow it had worked its way loose. The whole area does seem original and nothing had moved so I tapped the pin back in and filled the space with solder and used a centre punch to crimp the end over that I reckon it should work ok. The parts I ordered arrived today which once again is amassing. You all rock over there. I ordered a Clymers manual with the order, you informed me Brian that it was out of stock and you had them on a back order. Could you send me one when you get them in. Once again many thanks and kind regards to you all in the west.