CLUTCH HOUSING
$ 205.00
Available on back-order
Description
- R2V 1975 > 1996 (Not Paralevers models after 08/1990 > 1996)
**Please note if using this Clutch housing for R2V models before 08/1980 you will need Clutch lever Part # 2161054R and to cover choke lever hole Part # 3211111R
(Pre 08/1980 lever and housing are no longer available)
Related Products
You might also like
Product categories
- R Series 1970 > 1996 *
- R50/5 R60/5 R75/5
- R60/6 R75/6 R90/6
- R90S
- Accessories & Equipment
- General Service Parts
- Engine
- Engine Electrics
- Mixture Preparation & Control
- Fuel Tank
- Exhaust
- Clutch
- Gearbox
- Driveshaft
- Front Forks
- Steering
- Final Drive
- Brakes
- Pedals
- Wheels & Tyres
- Suspension
- Frame
- Screen
- Seat
- General Electrics
- Instruments
- Lights
- Cables
- Manuals & Books
- Metzeler Tyres
- Hepco & Becker Luggage
- R60/7 R75/7 R80/7
- R100/7 RS RT S >1981
- R45 R65 R65LS 1978>1984
- R80 R80RT 1981>1984
- R100 RS RT CS 1981>1984
- R80G/S ST 1981>1987
- R65 R80 R80RT 1985>
- R100RS RT 1985>
- R80 R100GS & PD 1988>
- R80R R100R Mystic
- K Series 1983 > 2004 *
- K Series 2005 > *
- R4V Series 1993 > 2004 *
- R4V Series 2005 > *
- R4V LC Series 2013 > *
- F & G Single Cylinder 1993 > *
- F Twin Cylinders 2006 > *
- S Series *
- C Scooters *
- Pre 1970 Models *
- 2nd Hand & Clearance Parts *
- Handlebars (Lucas Germany) *
- Extenda Fenda *
- Rugged Roads GS Equipment *
- General Parts Sections *
Testimonials
Pass my thanks on to Bruce for his excellent diagnostics
Please pass my thanks on to Bruce for his excellent diagnostics. On his advice I checked both butterflys with a torch and both were bleeding light. I adjusted them to seat properly and was then able to balance the carbs perfectly and get it to idle nice and slow. It runs beautifully now, very smooth and responsive. Thanks again for your help and excellent service as always.
Less than 22 hours from order
The diode board arrived here in Whittlesea Victoria at about 11.00am EST, less than 22 hours after I ordered it from you in Perth. Very surprised and pleased about that. 1 hour later the part is installed and the bike ran as it should. Thank you guys. Merry Christmas